| ADLK |
FIRST LEG LENGTH |
0.875 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.032 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.098 INCHES MINIMUM AND 0.193 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.312 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 302 |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AHQN |
FIRST LEG WIDTH |
0.625 INCHES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.500 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.625 INCHES NOMINAL |
| AARN |
FABRICATION METHOD (NON-CORE) |
STAMPED |
| ADLL |
SECOND LEG LENGTH |
0.875 INCHES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.500 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.312 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.098 INCHES MINIMUM AND 0.128 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.312 INCHES NOMINAL |
| AJFQ |
SECOND LEG END RADIUS |
0.312 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AJFP |
FIRST LEG END RADIUS |
0.312 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.312 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.032 INCHES NOMINAL |