| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5,T72 FED SPEC SINGLE MATERIAL RESPONSE |
| CSSQ |
FIRST LEG ANGLE |
60.0 DEGREES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.032 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| ADLK |
FIRST LEG LENGTH |
0.670 INCHES MINIMUM AND 0.730 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.098 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
PLASTIC EPOXY |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MMS405,FSCM 76301 MFR REF SINGLE TREATMENT RESPONSE |
| ADLL |
SECOND LEG LENGTH |
0.670 INCHES MINIMUM AND 0.730 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.362 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.362 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.098 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.776 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.362 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.750 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHPX |
SECOND LEG THICKNESS |
0.032 INCHES NOMINAL |