| AHLN |
SECOND LEG HOLE DIAMETER |
0.189 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.189 INCHES MINIMUM AND 0.204 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| ADLK |
FIRST LEG LENGTH |
0.977 INCHES MINIMUM AND 1.029 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHPW |
FIRST LEG THICKNESS |
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
1.610 INCHES MINIMUM AND 1.650 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHQN |
FIRST LEG WIDTH |
0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| AJFQ |
SECOND LEG END RADIUS |
0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| AJFP |
FIRST LEG END RADIUS |
0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 321 |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.190 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.190 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |