| AHPX |
SECOND LEG THICKNESS |
0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.650 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| ADLL |
SECOND LEG LENGTH |
3.050 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AJFP |
FIRST LEG END RADIUS |
0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AHQN |
FIRST LEG WIDTH |
0.625 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.625 INCHES NOMINAL |
| AJFQ |
SECOND LEG END RADIUS |
0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.312 INCHES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.400 NOMINAL INCHES |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.420 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
1.200 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.240 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.312 INCHES NOMINAL |
| MATT |
MATERIAL |
TITANIUM ALLOY |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 4911 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |