| AHPW |
FIRST LEG THICKNESS |
0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.098 INCHES MINIMUM AND 0.103 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.446 INCHES MINIMUM AND 0.454 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.281 NOMINAL INCHES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHQN |
FIRST LEG WIDTH |
0.438 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| CSSQ |
FIRST LEG ANGLE |
85.0 DEGREES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.219 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.438 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.219 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.725 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5540 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |