| AGAV |
END ITEM IDENTIFICATION |
ENG J-57 |
| AHLF |
SECOND LEG WIDTH |
0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
0.560 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.800 INCHES MINIMUM AND 0.820 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.280 INCHES NOMINAL |
| AHLH |
SECOND LEG END WIDTH |
1.590 INCHES MINIMUM AND 1.610 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHPX |
SECOND LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| AHLG |
SECOND LEG CORNER RADIUS |
0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
2.340 INCHES MINIMUM AND 2.360 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKBU |
SECOND LEG STYLE |
RADIUS FOOT |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.979 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.280 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHLM |
FIRST LEG SLOT WIDTH |
0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| AHLL |
FIRST LEG SLOT LENGTH |
0.340 INCHES MINIMUM AND 0.360 INCHES MAXIMUM |
| AJFP |
FIRST LEG END RADIUS |
0.280 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.297 INCHES MINIMUM AND 0.328 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 410 |
| AHPW |
FIRST LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |