| STYL |
STYLE DESIGNATOR |
ANGLE |
| SFTT |
SURFACE TREATMENT |
PASSIVATE |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-766 TEMP 1/2 HARD FED SPEC SINGLE MATERIAL RESPONSE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.063 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| ADLK |
FIRST LEG LENGTH |
1.040 INCHES MINIMUM AND 1.100 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| AHMA |
SECOND LEG SLOT WIDTH |
0.360 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.600 INCHES MINIMUM AND 0.660 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.062 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.570 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.420 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.590 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 301 |
| ADLL |
SECOND LEG LENGTH |
3.440 INCHES MINIMUM AND 3.500 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
0.840 INCHES MINIMUM AND 0.900 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-STD-171 MIL SPEC SINGLE TREATMENT RESPONSE |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |