| AARN |
FABRICATION METHOD (NON-CORE) |
ANY ACCEPTABLE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.528 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHPW |
FIRST LEG THICKNESS |
0.050 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
1.500 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 302 |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-766,CLASS 302,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AHLF |
SECOND LEG WIDTH |
7.370 INCHES NOMINAL |
| AHLG |
SECOND LEG CORNER RADIUS |
0.120 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.050 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHQN |
FIRST LEG WIDTH |
5.000 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
6.332 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.320 INCHES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
0.120 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.000 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.340 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.242 INCHES MINIMUM AND 0.257 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.500 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
1.500 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-S-171 MIL SPEC SINGLE TREATMENT RESPONSE |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |