| AHLN |
SECOND LEG HOLE DIAMETER |
0.210 INCHES MINIMUM AND 0.220 INCHES MAXIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.063 INCHES MINIMUM AND 1.073 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AHLF |
SECOND LEG WIDTH |
1.493 INCHES MINIMUM AND 1.533 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
END RADIUS AND TAPERED |
| AHQP |
FIRST LEG CORNER RADIUS |
0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL |
| AJFQ |
SECOND LEG END RADIUS |
0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5052 MIL SPEC SINGLE MATERIAL RESPONSE |
| AHQN |
FIRST LEG WIDTH |
1.493 INCHES MINIMUM AND 1.533 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.230 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
1.330 INCHES MINIMUM AND 1.370 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.040 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.040 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| ADLK |
FIRST LEG LENGTH |
0.440 INCHES MINIMUM AND 0.480 INCHES MAXIMUM |