| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.260 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.281 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| MATT |
MATERIAL |
STEEL COMP 321 |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.091 INCHES MINIMUM AND 0.109 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
0.610 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.218 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| AHQN |
FIRST LEG WIDTH |
0.610 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
1.491 INCHES MINIMUM AND 1.529 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.151 INCHES MINIMUM AND 1.189 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.091 INCHES MINIMUM AND 0.109 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |