| AJFP |
FIRST LEG END RADIUS |
0.750 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.625 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.750 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.391 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.750 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.375 INCHES NOMINAL |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.375 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHPX |
SECOND LEG THICKNESS |
0.125 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| ADLK |
FIRST LEG LENGTH |
1.125 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| AHMA |
SECOND LEG SLOT WIDTH |
0.391 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
4.806 INCHES NOMINAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
3.063 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
3.031 INCHES NOMINAL |
| AJFQ |
SECOND LEG END RADIUS |
0.750 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.125 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
M.4M,FSCM 72582 MFR REF SINGLE MATERIAL RESPONSE |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |