| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| ADLL |
SECOND LEG LENGTH |
0.750 INCHES MINIMUM AND 0.870 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| ADLK |
FIRST LEG LENGTH |
0.625 INCHES MINIMUM AND 0.745 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AHLG |
SECOND LEG CORNER RADIUS |
0.218 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.025 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHQP |
FIRST LEG CORNER RADIUS |
0.218 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.150 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.025 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.097 INCHES MINIMUM AND 0.102 INCHES MAXIMUM |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| MATT |
MATERIAL |
TITANIUM ALLOY |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.218 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 4911 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |