| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.620 INCHES NOMINAL |
| AHMA |
SECOND LEG SLOT WIDTH |
0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 5052 |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHPW |
FIRST LEG THICKNESS |
0.090 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE |
| AHLL |
FIRST LEG SLOT LENGTH |
0.250 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.300 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.250 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPX |
SECOND LEG THICKNESS |
0.090 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
6.000 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
3 SLOTTED HOLES IN FIRST LEG,3 SLOTTED HOLES IN SECOND LEG |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.350 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
6.000 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.900 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLM |
FIRST LEG SLOT WIDTH |
0.182 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
1.000 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| ADLK |
FIRST LEG LENGTH |
0.750 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |