| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.562 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.125 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.097 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AHQN |
FIRST LEG WIDTH |
1.125 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS AND TAPERED |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE |
| AHLF |
SECOND LEG WIDTH |
1.125 INCHES NOMINAL |
| AARN |
FABRICATION METHOD (NON-CORE) |
STAMPED |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.500 NOMINAL INCHES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.097 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| ZZZV |
FSC APPLICATION DATA |
SPAR ASSEMBLY,CENTER SECTION FRONT,AIRCRAFT |
| AHQP |
FIRST LEG CORNER RADIUS |
0.250 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.040 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.040 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| ADLK |
FIRST LEG LENGTH |
0.750 INCHES NOMINAL |
| AJFQ |
SECOND LEG END RADIUS |
0.250 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |