| STYL |
STYLE DESIGNATOR |
ANGLE |
| ADLL |
SECOND LEG LENGTH |
0.940 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.237 INCHES MINIMUM AND 0.297 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.210 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AJFQ |
SECOND LEG END RADIUS |
0.275 INCHES MINIMUM AND 0.355 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.710 INCHES MINIMUM AND 0.790 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
0.460 INCHES MINIMUM AND 0.540 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHQN |
FIRST LEG WIDTH |
0.460 INCHES MINIMUM AND 0.540 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.585 INCHES MINIMUM AND 0.665 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.051 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.210 INCHES MINIMUM AND 0.290 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.335 INCHES MINIMUM AND 0.415 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 5052 |
| HEAT |
HEAT TREATMENT |
T-3 SOLUTION HEAT TREATED |
| AJFP |
FIRST LEG END RADIUS |
0.275 INCHES MINIMUM AND 0.355 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.164 INCHES MINIMUM AND 0.244 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.051 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |