| AHLH |
SECOND LEG END WIDTH |
0.990 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.169 INCHES MINIMUM AND 0.177 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.440 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.279 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.160 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5,ALCLAD T3 FED SPEC SINGLE MATERIAL RESPONSE |
| AARN |
FABRICATION METHOD (NON-CORE) |
STAMPED |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKBU |
SECOND LEG STYLE |
SQUARE AND TAPERED |
| ADLK |
FIRST LEG LENGTH |
0.560 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHQN |
FIRST LEG WIDTH |
1.650 INCHES NOMINAL |
| HEAT |
HEAT TREATMENT |
T-3 SOLUTION HEAT TREATED |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.750 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.191 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.312 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.040 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.040 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.880 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.169 INCHES MINIMUM AND 0.177 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
1.650 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |