| AHPW |
FIRST LEG THICKNESS |
0.056 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| ADLK |
FIRST LEG LENGTH |
0.320 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.056 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
0.754 INCHES MINIMUM AND 0.786 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.286 INCHES NOMINAL |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.798 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLF |
SECOND LEG WIDTH |
3.032 INCHES MINIMUM AND 3.064 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE |
| AJZU |
FIRST LEG STYLE |
SQUARE AND TAPERED |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 410 |
| AHLG |
SECOND LEG CORNER RADIUS |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |