| AHLF |
SECOND LEG WIDTH |
1.187 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.594 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
TT-P-1757 FED SPEC SINGLE TREATMENT RESPONSE |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.098 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.187 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.375 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AARN |
FABRICATION METHOD (NON-CORE) |
STAMPED |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.312 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.192 INCHES MINIMUM AND 0.196 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLG |
SECOND LEG CORNER RADIUS |
0.250 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.312 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5,T42 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT |
SURFACE TREATMENT |
CHROMATE ZINC |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AJFP |
FIRST LEG END RADIUS |
0.312 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.040 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.040 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| ADLK |
FIRST LEG LENGTH |
0.750 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |