| AHPW |
FIRST LEG THICKNESS |
0.063 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| HEAT |
HEAT TREATMENT |
T-4 SOLUTION HEAT TREATED |
| AHQN |
FIRST LEG WIDTH |
0.750 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.750 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.063 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.251 INCHES MINIMUM AND 0.258 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/3,T4 FED SPEC SINGLE MATERIAL RESPONSE |
| AARN |
FABRICATION METHOD (NON-CORE) |
STAMPED |
| ADLL |
SECOND LEG LENGTH |
1.500 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.500 NOMINAL INCHES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.220 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.380 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.380 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| ADLK |
FIRST LEG LENGTH |
1.000 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.410 INCHES NOMINAL |