| AHLF |
SECOND LEG WIDTH |
1.719 INCHES MINIMUM AND 1.781 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
1.719 INCHES MINIMUM AND 1.781 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.500 INCHES MINIMUM AND 0.504 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| AJFP |
FIRST LEG END RADIUS |
0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AHPX |
SECOND LEG THICKNESS |
0.156 INCHES MINIMUM AND 0.219 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| ADLL |
SECOND LEG LENGTH |
1.469 INCHES MINIMUM AND 1.531 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.156 INCHES MINIMUM AND 0.219 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
1.344 INCHES MINIMUM AND 1.406 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.406 INCHES MINIMUM AND 0.422 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
CADMIUM AND CHROMATE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TY 2,CL2 FED SPEC ALL TREATMENT RESPONSES |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |