| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
QQ-P-416,TYPE 1,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE |
| AJFQ |
SECOND LEG END RADIUS |
0.500 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| ADLL |
SECOND LEG LENGTH |
1.064 INCHES MINIMUM AND 1.126 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.085 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.969 INCHES MINIMUM AND 1.031 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| AHQP |
FIRST LEG CORNER RADIUS |
0.250 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6370 ASSN STD SINGLE MATERIAL RESPONSE OR SAE 4130 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLF |
SECOND LEG WIDTH |
1.469 INCHES MINIMUM AND 1.531 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
1.469 INCHES MINIMUM AND 1.531 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.710 INCHES MINIMUM AND 0.772 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.610 INCHES MINIMUM AND 0.672 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.197 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHPW |
FIRST LEG THICKNESS |
0.085 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 4130 |
| SFTT |
SURFACE TREATMENT |
CADMIUM |