| AHLF |
SECOND LEG WIDTH |
0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.280 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
PASSIVATE |
| AHPX |
SECOND LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| ADLL |
SECOND LEG LENGTH |
1.630 INCHES MINIMUM AND 1.650 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.696 INCHES MINIMUM AND 0.728 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.280 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.280 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AJFQ |
SECOND LEG END RADIUS |
0.280 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| AJFP |
FIRST LEG END RADIUS |
0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| AHQA |
CENTER SECTION WIDTH |
0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
0.550 INCHES MINIMUM AND 0.570 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
99.0 DEGREES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 410 |
| AHPZ |
CENTER SECTION HEIGHT |
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.216 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |