| CSSQ |
FIRST LEG ANGLE |
93.5 DEGREES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.220 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.260 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.260 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.520 INCHES MINIMUM |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.260 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.219 INCHES NOMINAL |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLF |
SECOND LEG WIDTH |
0.520 INCHES MINIMUM AND 0.600 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
0.960 INCHES MINIMUM AND 1.000 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.780 INCHES MINIMUM AND 0.820 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHPX |
SECOND LEG THICKNESS |
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| AJFQ |
SECOND LEG END RADIUS |
0.380 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 321 |
| FEAT |
SPECIAL FEATURES |
FIRST LEG ANGLE IN DEGREES 100.0 MIN. 104.0 MAX. |
| AJFP |
FIRST LEG END RADIUS |
0.380 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.344 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |