| AHQN |
FIRST LEG WIDTH |
1.120 INCHES MINIMUM AND 1.130 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
1.120 INCHES MINIMUM AND 1.130 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/6 FED SPEC SINGLE MATERIAL RESPONSE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AHLG |
SECOND LEG CORNER RADIUS |
0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.620 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM |
| AHQP |
FIRST LEG CORNER RADIUS |
0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |