| AHLN |
SECOND LEG HOLE DIAMETER |
0.656 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
PHOSPHATE |
| AHQN |
FIRST LEG WIDTH |
4.000 INCHES NOMINAL |
| AHQQ |
FIRST LEG END WIDTH |
3.000 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
2.000 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHPW |
FIRST LEG THICKNESS |
0.375 INCHES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-12968,TYPE B,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
1.875 NOMINAL INCHES |
| AHLL |
FIRST LEG SLOT LENGTH |
2.188 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
THREE HOLES |
| AHLF |
SECOND LEG WIDTH |
4.000 INCHES NOMINAL |
| AHLM |
FIRST LEG SLOT WIDTH |
0.656 INCHES MINIMUM AND 0.688 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
4.000 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-13281 MIL SPEC SINGLE MATERIAL RESPONSE |
| AHPX |
SECOND LEG THICKNESS |
0.375 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE AND TAPERED |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.250 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
1.516 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
5.000 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE AND TAPERED |
| AHLQ |
SECOND LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH |
2.250 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| FEAT |
SPECIAL FEATURES |
SLOT IN SECOND LEG 1.312 IN. LG,0.656 IN. W |
| AHLH |
SECOND LEG END WIDTH |
3.000 INCHES NOMINAL |
| AHLT |
SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
1.125 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.875 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |