| AHPX |
SECOND LEG THICKNESS |
0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.220 INCHES MINIMUM AND 0.229 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLF |
SECOND LEG WIDTH |
1.230 INCHES MINIMUM AND 1.310 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
1.105 INCHES MINIMUM AND 1.145 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AJZU |
FIRST LEG STYLE |
END RADIUS AND TAPERED |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHQN |
FIRST LEG WIDTH |
0.770 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5599 ASSN STD SINGLE MATERIAL RESPONSE |
| AJFP |
FIRST LEG END RADIUS |
0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| AHLG |
SECOND LEG CORNER RADIUS |
0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| MATT |
MATERIAL |
NICKEL ALLOY |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.770 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.630 INCHES MINIMUM AND 0.670 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |