| AHLK |
FIRST LEG HOLE DIAMETER |
0.169 INCHES MINIMUM AND 0.177 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.063 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-225/8,TEMPER T4 FED SPEC SINGLE MATERIAL RESPONSE |
| FEAT |
SPECIAL FEATURES |
HOLE CENTERED BETWEEN 4 HOLES 0.438 IN. DIA |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.340 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AHPX |
SECOND LEG THICKNESS |
0.063 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.190 INCHES NOMINAL |
| AHLG |
SECOND LEG CORNER RADIUS |
0.190 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.750 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6061 |
| AHQN |
FIRST LEG WIDTH |
1.190 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.500 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.114 INCHES NOMINAL |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.500 NOMINAL INCHES |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.108 INCHES MINIMUM AND 0.114 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.560 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.220 INCHES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
0.190 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.190 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| ADLL |
SECOND LEG LENGTH |
1.000 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CHROMATE |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |