| AHLN |
SECOND LEG HOLE DIAMETER |
0.906 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
1.240 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.051 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
2.250 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHPW |
FIRST LEG THICKNESS |
0.051 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.300 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
80.0 DEGREES NOMINAL |
| AJFP |
FIRST LEG END RADIUS |
0.300 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5,ALCLAD T4 FED SPEC SINGLE MATERIAL RESPONSE |
| AHPZ |
CENTER SECTION HEIGHT |
1.750 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.170 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.750 INCHES NOMINAL |
| AJFQ |
SECOND LEG END RADIUS |
0.750 INCHES NOMINAL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AHPX |
SECOND LEG THICKNESS |
0.051 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.344 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.300 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
2.850 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.977 INCHES NOMINAL |
| HEAT |
HEAT TREATMENT |
COLD WORKED |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| AHQA |
CENTER SECTION WIDTH |
2.900 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |