| ADLK |
FIRST LEG LENGTH |
1.080 INCHES MINIMUM AND 1.270 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.092 INCHES MINIMUM AND 0.108 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
ANY ACCEPTABLE |
| ADLL |
SECOND LEG LENGTH |
3.050 INCHES MINIMUM AND 3.110 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLM |
FIRST LEG SLOT WIDTH |
0.210 INCHES MINIMUM AND 0.230 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.650 INCHES MINIMUM AND 0.700 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.860 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AHLL |
FIRST LEG SLOT LENGTH |
0.420 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
0.130 INCHES MINIMUM AND 0.140 INCHES MAXIMUM |
| AJFQ |
SECOND LEG END RADIUS |
0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHLF |
SECOND LEG WIDTH |
2.420 INCHES MINIMUM AND 2.460 INCHES MAXIMUM |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN |
| AJFP |
FIRST LEG END RADIUS |
0.650 INCHES MINIMUM AND 0.700 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.092 INCHES MINIMUM AND 0.108 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
152.0 DEGREES MINIMUM AND 154.0 DEGREES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.650 INCHES MINIMUM AND 0.700 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.274 INCHES MINIMUM AND 0.288 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |