| STYL |
STYLE DESIGNATOR |
ANGLE |
| AJFQ |
SECOND LEG END RADIUS |
0.500 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.750 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.750 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.375 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.188 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
FOUR HOLES |
| AHPW |
FIRST LEG THICKNESS |
0.051 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5,ALCLAD T4 FED SPEC SINGLE MATERIAL RESPONSE |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
WEB CENTER SECTION |
| AHRD |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH |
0.188 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.313 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.188 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.098 INCHES NOMINAL |
| AHQY |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH |
0.188 INCHES NOMINAL |
| AHRC |
FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH |
0.188 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.051 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.812 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AJFP |
FIRST LEG END RADIUS |
0.500 INCHES NOMINAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.125 INCHES NOMINAL |
| AHQZ |
FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH |
0.188 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.812 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.375 INCHES NOMINAL |