| AHQB |
CENTER SECTION THICKNESS |
0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
END RADIUS AND TAPERED |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.455 INCHES MINIMUM AND 0.525 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
2.010 INCHES MINIMUM AND 2.090 INCHES MAXIMUM |
| AHQV |
FIRST LEG DISTANCE BETWEEN UPPER HOLE CENTERS ALONG WIDTH |
1.300 INCHES MINIMUM AND 1.320 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.281 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| ADLK |
FIRST LEG LENGTH |
1.415 INCHES MINIMUM AND 1.555 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.300 INCHES MINIMUM AND 1.320 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 321 |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHMA |
SECOND LEG SLOT WIDTH |
0.213 INCHES MINIMUM AND 0.223 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSR |
SECOND LEG ANGLE |
135.0 DEGREES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.240 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| AHQA |
CENTER SECTION WIDTH |
1.620 INCHES MINIMUM AND 1.700 INCHES MAXIMUM |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.710 INCHES MINIMUM AND 0.730 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.190 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |