| STYL |
STYLE DESIGNATOR |
ANGLE |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| ADLK |
FIRST LEG LENGTH |
0.860 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.219 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| ADLL |
SECOND LEG LENGTH |
0.960 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.281 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| AHPW |
FIRST LEG THICKNESS |
0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| AJFQ |
SECOND LEG END RADIUS |
0.380 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.500 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.500 INCHES NOMINAL |
| AJFP |
FIRST LEG END RADIUS |
0.380 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS5040 ASSN STD 1ST MATERIAL RESPONSE AND AMS5042 ASSN STD 2ND MATERIAL RESPONSE |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| ZZZV |
FSC APPLICATION DATA |
ENGINE,JET,ACFT |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.210 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.240 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| SFTT |
SURFACE TREATMENT |
CADMIUM |