| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.050 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
0.800 INCHES NOMINAL |
| AJFQ |
SECOND LEG END RADIUS |
0.400 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.050 INCHES NOMINAL |
| AJFP |
FIRST LEG END RADIUS |
0.400 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.800 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.800 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.400 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.281 INCHES MINIMUM AND 0.307 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.050 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.218 INCHES MINIMUM AND 0.228 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.400 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.400 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.400 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 301 |
| HEAT |
HEAT TREATMENT |
COLD WORKED |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |