| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.375 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.250 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
ANGLE |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AJZU |
FIRST LEG STYLE |
ANGLE |
| HEAT |
HEAT TREATMENT |
T-4 SOLUTION HEAT TREATED |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
1.265 INCHES MINIMUM AND 1.355 INCHES MAXIMUM |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
1.670 INCHES MINIMUM AND 1.730 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.064 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| SFTT |
SURFACE TREATMENT |
ANODIZE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES MINIMUM AND 0.310 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AHPX |
SECOND LEG THICKNESS |
0.064 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/4 FED SPEC SINGLE MATERIAL RESPONSE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.395 INCHES MINIMUM AND 0.425 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| AHMA |
SECOND LEG SLOT WIDTH |
0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |