| AHLF |
SECOND LEG WIDTH |
1.440 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.200 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHPW |
FIRST LEG THICKNESS |
0.200 INCHES NOMINAL |
| HEAT |
HEAT TREATMENT |
T-6 SOLUTION HEAT TREATED |
| AARN |
FABRICATION METHOD (NON-CORE) |
CAST |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| ADLK |
FIRST LEG LENGTH |
1.970 INCHES NOMINAL |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.800 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.500 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.530 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.440 INCHES NOMINAL |
| AHLG |
SECOND LEG CORNER RADIUS |
0.090 INCHES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
0.090 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| MATT |
MATERIAL |
ALUMINUM ALLOY 356.0 |
| ADLL |
SECOND LEG LENGTH |
1.970 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.720 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-601,T6 FED SPEC SINGLE MATERIAL RESPONSE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.260 INCHES MINIMUM AND 0.267 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.720 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.376 INCHES MINIMUM AND 0.383 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |