| ADLL |
SECOND LEG LENGTH |
0.927 INCHES MINIMUM AND 0.942 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHQN |
FIRST LEG WIDTH |
0.750 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.750 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.344 INCHES MINIMUM AND 0.407 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.375 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.375 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.203 INCHES MINIMUM AND 0.234 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.344 INCHES MINIMUM AND 0.407 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
ONE BOSS 0.563 IN. OD,0.156 IN. MIN,0.219 IN. MAX H,CENTERED ON MTG HOLE OF FIRST LEG |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.328 INCHES MINIMUM AND 0.359 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| MATT |
MATERIAL |
STEEL |
| AHPW |
FIRST LEG THICKNESS |
0.052 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
ASTM A400 ASSN STD SINGLE MATERIAL RESPONSE |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHPX |
SECOND LEG THICKNESS |
0.052 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.927 INCHES MINIMUM AND 0.942 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |