| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLF |
SECOND LEG WIDTH |
0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
2.000 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.625 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.054 INCHES MINIMUM AND 0.074 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5,ALCLAD T3 FED SPEC SINGLE MATERIAL RESPONSE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| ADLK |
FIRST LEG LENGTH |
2.250 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.054 INCHES MINIMUM AND 0.074 INCHES MAXIMUM |
| FEAT |
SPECIAL FEATURES |
FURNISHED WITH ONE NUT,PLAIN,BLIND RIVET |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |