| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.100 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.370 NOMINAL MILS AND 0.380 NOMINAL CENTIMETERS |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AJZU |
FIRST LEG STYLE |
ANGLE |
| SFTT |
SURFACE TREATMENT |
PASSIVATE |
| ACHY |
MOUNTING HOLE TYPE |
THREADED |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.069 INCHES MINIMUM AND 0.072 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| ADLL |
SECOND LEG LENGTH |
0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM |
| AHQQ |
FIRST LEG END WIDTH |
0.030 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
NO HOLE |
| MATT |
MATERIAL |
STEEL COMP 304 |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| ADLK |
FIRST LEG LENGTH |
0.500 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.060 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
0.280 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |