| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AJFQ |
SECOND LEG END RADIUS |
0.375 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.189 INCHES MINIMUM AND 0.199 INCHES MAXIMUM |
| AJFP |
FIRST LEG END RADIUS |
0.375 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| ADLK |
FIRST LEG LENGTH |
1.547 INCHES MINIMUM AND 1.578 INCHES MAXIMUM |
| AHQX |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHPX |
SECOND LEG THICKNESS |
0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
STAMPED |
| ADLL |
SECOND LEG LENGTH |
0.672 INCHES MINIMUM AND 0.703 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| FEAT |
SPECIAL FEATURES |
FURNISHED WITH ONE NUT,PLAIN,BLIND RIVET |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.199 INCHES MINIMUM AND 0.209 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
0.615 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
GUSSET BOTH SIDES |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.615 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |