| AHLK |
FIRST LEG HOLE DIAMETER |
0.216 INCHES MINIMUM AND 0.229 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
2.132 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.320 INCHES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.320 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHLF |
SECOND LEG WIDTH |
2.452 INCHES NOMINAL |
| CBBL |
FEATURES PROVIDED |
NUT |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.1924 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5512 ASSN STD SINGLE MATERIAL RESPONSE |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.220 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.320 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.3120 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.770 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.039 INCHES MINIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.308 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL CORROSION RESISTING |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.650 INCHES NOMINAL |
| AHLG |
SECOND LEG CORNER RADIUS |
0.320 INCHES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
0.220 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.309 INCHES MINIMUM |
| FEAT |
SPECIAL FEATURES |
SECOND LEG INCL NUT PLATE MS21048-4 RIVETED OVER SECOND HOLE W/AN125422 TWO PLACES; USED ON TF41 ENGINE |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| ACHY |
MOUNTING HOLE TYPE |
PLAIN AND THREADED |