| AHPW |
FIRST LEG THICKNESS |
0.063 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.193 INCHES MINIMUM AND 0.208 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHLF |
SECOND LEG WIDTH |
0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AHQN |
FIRST LEG WIDTH |
0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
2.969 INCHES MINIMUM AND 3.031 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.251 INCHES MINIMUM AND 0.257 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.063 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5,ALCLAD T3 FED SPEC SINGLE MATERIAL RESPONSE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AARN |
FABRICATION METHOD (NON-CORE) |
STAMPED |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| FEAT |
SPECIAL FEATURES |
FURNISHED WITH ONE NUT,PLAIN,BLIND RIVET |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.281 INCHES MINIMUM AND 0.344 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLG |
SECOND LEG CORNER RADIUS |
0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| AHQP |
FIRST LEG CORNER RADIUS |
0.094 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |