| STYL |
STYLE DESIGNATOR |
ANGLE |
| ADLL |
SECOND LEG LENGTH |
1.397 INCHES MINIMUM AND 1.429 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHLF |
SECOND LEG WIDTH |
0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| AHLM |
FIRST LEG SLOT WIDTH |
0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHPW |
FIRST LEG THICKNESS |
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| AJFP |
FIRST LEG END RADIUS |
0.420 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.697 INCHES MINIMUM AND 0.729 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AJFQ |
SECOND LEG END RADIUS |
0.420 INCHES MINIMUM AND 0.450 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| AHLL |
FIRST LEG SLOT LENGTH |
0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.170 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| MATT |
MATERIAL |
STEEL COMP 321 |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.290 INCHES MINIMUM AND 0.340 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.213 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |