| AHPW |
FIRST LEG THICKNESS |
0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.530 INCHES MINIMUM AND 0.590 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
89.5 DEGREES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AHPX |
SECOND LEG THICKNESS |
0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5,ALCLAD T3 FED SPEC SINGLE MATERIAL RESPONSE |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.530 INCHES MINIMUM AND 0.590 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.593 INCHES MINIMUM AND 0.600 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
1.090 INCHES MINIMUM AND 1.150 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
1.090 INCHES MINIMUM AND 1.150 INCHES MAXIMUM |
| AHQP |
FIRST LEG CORNER RADIUS |
0.250 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.280 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
2.370 INCHES MINIMUM AND 2.430 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.570 INCHES MINIMUM AND 0.630 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| AJFQ |
SECOND LEG END RADIUS |
0.250 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |