| AJFP |
FIRST LEG END RADIUS |
0.440 INCHES NOMINAL |
| CSSR |
SECOND LEG ANGLE |
90.0 DEGREES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
SAE30321 FED SPEC SINGLE MATERIAL RESPONSE |
| AHLL |
FIRST LEG SLOT LENGTH |
0.380 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.440 INCHES NOMINAL |
| AJFQ |
SECOND LEG END RADIUS |
0.440 INCHES NOMINAL |
| AHPZ |
CENTER SECTION HEIGHT |
1.190 INCHES NOMINAL |
| AHQA |
CENTER SECTION WIDTH |
0.500 INCHES NOMINAL |
| AHPW |
FIRST LEG THICKNESS |
0.063 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
PASSIVATE |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AHPX |
SECOND LEG THICKNESS |
0.063 INCHES NOMINAL |
| AHQB |
CENTER SECTION THICKNESS |
0.063 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE SLOT |
| AHLM |
FIRST LEG SLOT WIDTH |
0.280 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
DOUBLE ANGLE |
| AHMA |
SECOND LEG SLOT WIDTH |
0.220 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 321 |
| ADLK |
FIRST LEG LENGTH |
0.620 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.500 INCHES NOMINAL |
| ZZZV |
FSC APPLICATION DATA |
ENGINE,JET ACFT |
| AHQN |
FIRST LEG WIDTH |
0.500 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.657 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| AHLZ |
SECOND LEG SLOT LENGTH |
0.380 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.340 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |