| AHLN |
SECOND LEG HOLE DIAMETER |
0.2188 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.250 INCHES NOMINAL |
| AHQP |
FIRST LEG CORNER RADIUS |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| CSSQ |
FIRST LEG ANGLE |
0.10 RADIANS MINIMUM AND 0.14 RADIANS MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.2188 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| ADLK |
FIRST LEG LENGTH |
0.790 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| AHPX |
SECOND LEG THICKNESS |
0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| ADLL |
SECOND LEG LENGTH |
1.000 INCHES NOMINAL |
| AJFQ |
SECOND LEG END RADIUS |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
0.500 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5510 ASSN STD SINGLE MATERIAL RESPONSE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
1.750 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |