| AHPX |
SECOND LEG THICKNESS |
0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 6350 ASSN STD 1ST MATERIAL RESPONSE OR AMS 6355 ASSN STD 2ND MATERIAL RESPONSE |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.290 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
CORNER RADIUS |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.896 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
END RADIUS AND TAPERED |
| AJFQ |
SECOND LEG END RADIUS |
0.375 INCHES NOMINAL |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.344 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
1.792 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE |
| AHQP |
FIRST LEG CORNER RADIUS |
0.344 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
1.792 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
1.048 INCHES MINIMUM AND 1.058 INCHES MAXIMUM |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| ADLK |
FIRST LEG LENGTH |
1.048 INCHES NOMINAL |
| AHQU |
FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.104 INCHES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.344 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 4130 OR STEEL COMP 8630 |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.276 INCHES MINIMUM AND 0.286 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |
| SFTT |
SURFACE TREATMENT |
CADMIUM |