| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.219 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| ZZZV |
FSC APPLICATION DATA |
COMPUTER,KS-92 CAMERA SYSTEM |
| FEAT |
SPECIAL FEATURES |
SUPPLIED WITH PENN ENGINEERING INSERT PART NO. CLS-632-2 IN FIRST LEG HOLE |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.1845 INCHES MINIMUM AND 0.1875 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.188 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| MATT |
MATERIAL |
ALUMINUM ALLOY 6063 |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.250 INCHES NOMINAL |
| ADLL |
SECOND LEG LENGTH |
0.500 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.188 INCHES NOMINAL |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE |
| AHPW |
FIRST LEG THICKNESS |
0.062 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
SQUARE |
| AHLF |
SECOND LEG WIDTH |
0.500 INCHES NOMINAL |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-200/9,T5 FED SPEC SINGLE MATERIAL RESPONSE |
| AHQN |
FIRST LEG WIDTH |
0.500 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.500 INCHES NOMINAL |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
IDENTICAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.165 INCHES MINIMUM AND 0.168 INCHES MAXIMUM |
| AHPX |
SECOND LEG THICKNESS |
0.062 INCHES NOMINAL |
| SFTT |
SURFACE TREATMENT |
CHROMATE |