| ADLL |
SECOND LEG LENGTH |
0.910 INCHES NOMINAL |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
1.078 INCHES NOMINAL |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.349 INCHES NOMINAL |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AKBU |
SECOND LEG STYLE |
CORNER RADIUS |
| AHPW |
FIRST LEG THICKNESS |
0.068 INCHES NOMINAL |
| AJFP |
FIRST LEG END RADIUS |
0.562 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.750 INCHES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
2.100 INCHES NOMINAL |
| ADLK |
FIRST LEG LENGTH |
0.775 INCHES NOMINAL |
| AHPX |
SECOND LEG THICKNESS |
0.068 INCHES NOMINAL |
| AARN |
FABRICATION METHOD (NON-CORE) |
MACHINED |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.375 INCHES NOMINAL |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AHLG |
SECOND LEG CORNER RADIUS |
0.500 INCHES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.260 INCHES NOMINAL |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
AMS 5504 ASSN STD SINGLE MATERIAL RESPONSE |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.375 INCHES NOMINAL |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.511 INCHES NOMINAL |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.224 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL COMP 410 |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |