| ADLK |
FIRST LEG LENGTH |
0.859 INCHES MINIMUM AND 0.891 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.171 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.193 INCHES MINIMUM AND 0.225 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.234 INCHES NOMINAL |
| AHQN |
FIRST LEG WIDTH |
0.486 INCHES MINIMUM AND 0.516 INCHES MAXIMUM |
| AHQQ |
FIRST LEG END WIDTH |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| SFTT |
SURFACE TREATMENT |
ZINC |
| AKBU |
SECOND LEG STYLE |
SQUARE |
| AHPW |
FIRST LEG THICKNESS |
0.048 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.136 INCHES MINIMUM AND 0.168 INCHES MAXIMUM |
| AHLP |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH |
0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-P-12011,CLASS RSC MIL SPEC SINGLE TREATMENT RESPONSE |
| AJZU |
FIRST LEG STYLE |
SQUARE AND TAPERED |
| MATT |
MATERIAL |
STEEL COMP 1009 |
| AHPX |
SECOND LEG THICKNESS |
0.048 INCHES MINIMUM AND 0.080 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLF |
SECOND LEG WIDTH |
0.734 INCHES MINIMUM AND 0.766 INCHES MAXIMUM |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM |
| ADLL |
SECOND LEG LENGTH |
0.421 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |