| ADLL |
SECOND LEG LENGTH |
0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| AJFP |
FIRST LEG END RADIUS |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHPW |
FIRST LEG THICKNESS |
0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| STYL |
STYLE DESIGNATOR |
ANGLE |
| ADLK |
FIRST LEG LENGTH |
0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| AHRA |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AKBU |
SECOND LEG STYLE |
END RADIUS |
| AFPW |
REINFORCEMENT METHOD (NON-CORE) |
BEADED BOTH SIDES |
| AHPX |
SECOND LEG THICKNESS |
0.053 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-A-250/5,ALCLAD T3 FED SPEC SINGLE MATERIAL RESPONSE |
| AJZU |
FIRST LEG STYLE |
END RADIUS |
| AHLV |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHQN |
FIRST LEG WIDTH |
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AHLF |
SECOND LEG WIDTH |
0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AKCU |
SECOND LEG HOLE ARRANGEMENT STYLE |
TWO HOLES |
| AKAU |
FIRST LEG HOLE ARRANGEMENT STYLE |
ONE HOLE |
| AHLS |
SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH |
0.365 NOMINAL MILS AND 0.385 NOMINAL CENTIMETERS |
| AHLN |
SECOND LEG HOLE DIAMETER |
0.118 INCHES MINIMUM AND 0.138 INCHES MAXIMUM |
| AJFQ |
SECOND LEG END RADIUS |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHRB |
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| CSSQ |
FIRST LEG ANGLE |
90.0 DEGREES NOMINAL |
| AHLW |
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH |
0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AHLK |
FIRST LEG HOLE DIAMETER |
0.194 INCHES MINIMUM AND 0.214 INCHES MAXIMUM |
| MATT |
MATERIAL |
ALUMINUM ALLOY 2024 |
| CSSP |
SECOND LEG RELATIONSHIP TO FIRST LEG |
NOT IDENTICAL |